|
|
|
|
|
|
|
|
|
|
|
|
|
P.T.F.E MOULDED & MACHINED COMPONENTS
|
|
| Model No.︰ | - |
| Brand Name︰ | SMS |
| Country of Origin︰ | - |
| Unit Price︰ | - |
| Minimum Order︰ | - |
|
|
|
|
|
|
|
| specifications︰ | P.T.F.E RODS:
Dia :19mm to 300mm ( Standard)
Length : 300mm Standard
Made to order :
a) Small OR long length upto 600mm and
upto 400Ø
b) Solid Circle upto max. 1000mm Ø
height upto 150mm
Material : 100 % PTFE and Filled PTFE
Filler : GLASS/CARBON/GRAPHITE/BRONZE
Dia : 3mm to 16 mm (Standard)
Length : 900mm OR 1000mm (Standard)
Made to Order :
Smaller OR Longer length.
Material : 100% PTFE only
P.T.F.E SHEETS:
Size Standard: 300mm x 300mm, 450mm x 450mm,500mm x 500mm, 600mm x 600mm, 900mm x 900mm, 1000mm x 1000mm
Thickness: 2mm to 25mm ( 1.5mm in 300 x 300 / 450 x 450)
Made to order:Thicker sheets upto 50mm.
Material: 100% PTFE and Filled PTFE.
Filler:Glass/ Carbon/ Graphite/Bronze
P.T.F.E SKIEVED SHEETS:
Width : 300mm to 650mm
Thickness : 0.1mm to 3.0mm
Length : In standard Roll from OR length cut to request.
Material : 100% PTFE
* PTFE / FEP / PFA / TEFZEL® LINED PIPES AND PIPE FITTINGS.
* PTFE COATED PIPES AND PIPE FITTINGS.
P.T.F.E DIAPHRAGMS:
FOR VALVES AND PUMPS
Size : 12 - 250mm NB Saunder Weir type Diaphragm Valve.
Stud : PIN Type/Screw Type upto 150mm.Screw type 200 - 250mm.
Padding : Neoprene Rubber Padded.
Made to order :
a) PTFE diaphragms for Pumps.
b) VITON®/SILICON/NEOPRENE/
BUTYL/HYPALON Rubber Diaphragms for Saunder weir type Valve.
Application:
To handle highly corrosive chemicals from 200ºC to 260ºC service temperature. For 7/8 Kgf/cm² line pressure. Also to handle sticky - abrasive fluids.
P.T.F.E BUSHES/HOLLOW BARS:
O.D. : 25mm to 150mm (Standard)
I.D. :12.5mm to 125mm (Standard)
Length : 100mm (Standard)
Made to order :
a) O.D. : 1100mm (Maximum)
I.D. : 6mm (Minimum)
Length : 100mm
b) Longer lengths upto 750mm for Bush
OD upto 300mm with minimum wall
thickness of 10mm.
Material : 100% PTFE and Filled PTFE.
Fillers: Glass/Carbon/Graphite/Bronze/
Bronze + MoS2
P.T.F.E ENVELOPE & MILLED TYPE GASKETS:
Milled & Slit type with or without CAF inserts. Milled type gives proper fitting for insert resulting in flat face to the flange. But it will be expensive While SLIT type envelope do not give fullflat face to the flange but it is cheaper as compared to Milled type.
Size : 12mm onwards with std flap thickness of 0.5mm (Other on request). Also in elliptical shapes and large sizes.
PTFE Solid Gaskets : Available in all shapes and sizes up to 1100 OD Maximum. Large size and shapes by welding process upto 15mm thickness.
Applications : Used in chemical plants, Glass lined pipes, fittings & tanks etc for static sealing of highly corrosive fluids at high temperature.
P.T.F.E UNIVERSAL ROPE GASKETS:
PTFE Universal Rope Gasket is soft unsintered material having very smooth surface finish and characterized by very low co-efficient of friction. This makes it very useful sealing material and used as gaskets on flanged connections of pipe, fittings, tanks & vessels and such other matting surfaces.
Size & shapes : 1.5mm - 29mm in Round/square sections in the length of 5 Mtr to 10 Mtr.
P.T.F.E MOULDED & MACHINED COMPONENTS:
Valves seats, Roof packings, Seal cover, Plug valve sleeve, wedge rings, 'O' rings, Washers, Bearings, & Bushings, Insulators, Pipe joints, Guides, Beakers, Piston Rings, Rider rings etc for non-lubricated compressors, Balls etc
P.T.F.E BELLOWS:
(STANDARD & AS PER DRAWING/SPECIFICATIONS)
Types:
QVF Bellow for Glass piping systems and Line Bellows for lined piping systems to accommodate shocks, vibrations, Linear expansion, compression of lines, axial misalignment etc. Valves with spindle for sealing fluid in glandless valves Stirrer Bellows for accommodating vibrations and shocks etc. Bellows as Pistons in glandless metering pumps.
Note :
Bellows with 'V' section convolutions are highly extensible, but notch-sensitive and hence suitable for use only at low pressure.
While Bellows with rounded convolutions are less flexible and extensible but suitable for use at high pressure.
Sizes : 25mm NB onwards upto 300mm NB. Bigger sizes on order with or without Aluminium or Steel flanges.
|
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
